Headphone Amplifier + DAC FiiO Q5 Bluetooth APTX DSD

Rp5,100,000.00

Description

Dual AK4490EN DAC chips for the ultimate in decoding performance

The Q5 is equipped with two of AKM’s AK4490EN DAC chips – known for its smooth, pleasant yet detailed sound due to its high signal-to-noise ratio and low distortion. Audio up to 384kHz/32 bit sampling rates and bit-depths are supported as well as native DSD up to DSD256. When DSD audio is transmitted to the Q5 in USB DAC usage, a green indicator will light up (*DSD indicator lights up when correctly set up. For more information, please visit the official support and FAQ page.)

Audiophile-grade components

The low-pass filter section of the Q5 employs Texas Instruments’ high performance OPA1642, while the MSP432 microcontroller ensures that audio signals are precisely handled with lower power consumption for longer battery life. When these elements are combined with the AK4490 DAC chip, Panasonic film capacitors, and the NJW1195 volume control chip, what results is a wonderful, melodious sound that is just pure ecstasy for your ears.

XMOS USB Audio to ensure a rock-solid connection

We elected to use the XMOS XUF208 microcontroller for its stability, powerful functionality, and its proven reliability. You can be sure that the Q5 will just work when connected to most audio sources, such as computers or mobile phones.

Package : 

  • Fiio Q5
  • Short and long Lightning-to-micro USB cables
  • 3.5mm cable
  • 2 x long straps
  • 2 x short straps
  • Coaxial adapter
  • Optical adapter
  • Screwdriver
  • Non-slip silicone pad
  • Carrying pouch
  • FREE leather case

Specification : 

General
Model Q5 Color Titanium
Weight About 195g Dimensions About 124mm x 64mm x 16mm
Audio Input Standard 3.5mm Port (Shared Line / Coaxial/ Optical in) Digital Coaxial Input Port Standard 3.5mm Port (Shared Line / Coaxial/ Optical in)
Digital/Optical Input Port Standard 3.5mm Port (Shared Line / Coaxial/ Optical in) USB Port 11-pin Micro USB at the bottom side,  for data exchanging and charging
5-pin Micro USB on the left side, for charging only by default
(Can be interchanged via App)
Analog Input port(LO) Standard 3.5mm stereo jack Headphone Output Port Standard 3.5mm stereo jack
Balanced Output Port 2.5mm port Recommended Headphone Impedance 16~150Ω(PO)
16~300Ω(BAL)
Channel Balance 0.1 dB Gain Yes(High/Low)
Bass Boost Up to 384kHz/32bit supported Volume Control Potentiometer(ADC Sampling)
Power Supply DC5V 2A (Recommended) Battery Capacity 3800 mAh
Charge Time ≤3.5 h (DV5V 2A,USB port on the side) Battery Life >25 h (AUX IN)
>10 h (USB IN)
>10 h (OPT IN)
>10 h (COAX IN)
>10 h (Bluetooth  IN)
Charging Indicator Red light flashes when being charged Low Battery Warning Red light flashes twice every 3 seconds
Red light goes off after fully charged
Bluetooth Bluetooth 4.2, supports aptX, AAC, SBC MFi Yes
Sampling Rate Supported Up to 384kHz/32bit(USB IN) DSD Support(USB IN) DSD64/128/256
192KHz/24bit(COAX IN)
96KHz/24bit(OPT IN)
Chips Used DAC: AK4490EN * 2  , USB:  XMOS   XU208 ,   Bluetooth: CSR8670 ,  LPF:OPA1642×2,Volume IC:NJW1195  OP+AMP:AD8620+OPA926
Line output specifications
THD+N <0.001% (1 kHz/10kΩ) SNR ≥115 dB (A-weighted)
Frequency Response 5 Hz~90 kHz(-3dB) Channel Separation >97 dB (1 kHz)
AM3A Headphone out specifications (3.5mm headphone out jack)
Output Power 1 ≥230 mW(16Ω / THD+N<1%) Output Impedance <1.4Ω (32Ω loaded)
Output Power 2 ≥160 mW(32Ω /THD+N<1%) Channel Separation ≥73 dB (1 kHz,AUX IN)
Output Power 3 ≥24 mW(300Ω / THD+N<1%) THD+N <0.001% (1 kHz)
Frequency Response 5 Hz~50 kHz(-3dB) Peak Output Voltage >6 Vp-p
SNR ≥115 dB (A-weighted) Max. Output Current 150mA (For reference)
Max. Input Level 3.8 Vrms
Balanced headphone out specifications (2.5mm TRRS headphone out jack)
Output Power 1 ≥470 mW(16Ω / THD+N<1%) Output Impedance <2Ω (32Ω loaded)
Output Power 2 ≥440 mW(32Ω /THD+N<1%) Channel Separation ≥99 dB (1 kHz,AUX IN)
Output Power 3 ≥93 mW(300Ω / THD+N<1%) THD+N <0.001% (1 kHz)
Frequency Response 5 Hz~50kHz(-3dB) Peak Output Voltage >10.5 Vp-p
SNR ≥115 dB (A-weighted) Max. Output Current 150 mA (For reference)
Max. Input Level 3.8 Vrms

Additional information

Weight 2 kg

Reviews

There are no reviews yet.

Be the first to review “Headphone Amplifier + DAC FiiO Q5 Bluetooth APTX DSD”